Step 1. Select the "Drawers" tool from the internal design toolbar, located in the "Partitioning" section.
Step 2. Select the back panel of void the drawer will be located in.
Step 3. Select the Base panel of the void that the drawer will be located in.
Step 4. The Drawer will now be highlighted as a box shown in green.
Step 5. A window will appear, prompting you to select the panel that will be used for the sides of the drawer, the panel that will be used for the base of your drawer and the runners that will be used.
Step 6. The drawer can now be trimmed to the size you want using the trim tool.
The trim tool can be used one of 2 ways:
Selectable trim
Select the face you want to move, to select, hover your mouse over the panel you want to select, this will highlight it red. click on the highlighted panel so it turn blue.
Select a element or work plane you want the face you want to be flush with.
The selected face of the drawer will now snap to the newly selected face.
Measurement trim
Select the face you want to move, to select, hover your mouse over the panel you want to select, this will highlight it red. click on the highlighted panel so it turn blue.
in the text box next to trim, input the amount you want to decrease or increase the size of the drawer.
Note: the decrease the drawer in this mode you will need to start your measurement with a "-", for example, lower a drawer top by 50mm would require the input of "-50" into the test box.
Once the drawer looks correct, click the green tick to confirm the operation or the red cross to cancel.