Making the case bigger.
Step 1. first of all we'll make the case bigger as they operate slightly differently. So we're going to go 1600mm wide, go slightly deeper as well.
Step 2. You'll notice that the handles and latches have stayed relevant and in the positions as per their defined anchor points.
Step 3. As you can see, the castor board / castor strip will have stayed in place.
Step 4. Click on edit tool and then select the castor board / castor strip. if working with a castor strip, select the original castor strip and not the mirrored part.
Step 5. Change the height of your castor board / castor strip and reposition them to your desired location.
Making the case smaller (Castor strips only)
Step 1. When the case is made smaller, the Autocase will realize that the castor strips are no longer attached to anything .
Step 2. Autocase will highlight the parts in bright colours to highlight they are no longer attached to the case.
Step 3. Autocase will then ask you to select the hardware, in this case is the castor strip. Select the castor strip.
Step 4. Autocase will then gives you the options to resize and reposition the castor strips
Step 5. Change the height of your castor board / castor strip and reposition them to your desired location.