Step 1. Click here on the place button

Step 2. Click the Drop Down Button on drop box for type
Click "Fixing"
Select the fixing you want to use
Click "Select"

Step 3. Click the green tick on the connect to Castor board prompt

Step 4. Select the castor you want to attach the fixing to

Step 5. Select the Anchor point you want the part to referance

Step 6. Click the green tick to select the anchor point

Step 7. move you part to its desired location

Step 8. Click the green tick to confirm its location

Step 9. Add another part if desired

Step 10. Now we are going to populate the recently added parts across the other castor boards by using the mirror tool.

Step 11. Select the parts you want to mirror

Step 12. Select the mirror planes

Step 13. Click the green tick to confirm the mirror operation

Step 14. The parts will now be populated on the castor boards

​