Step 1. Click the edit tool from the toolbar.

Step 2. Hover your mouse over the hardware you would like to select so that the hardware turns red, then click on the hardware, you will be asked if you want to “edit the position / Orientation” or “Edit mirror Operation” which allow you to edit the existing mirroring operation on the case.

Step 3. If the part you are editing is the Main hardware, then you can edit the position / Orientation. All other hardware linked to the main hardware will move in sync with that part or you can edit the mirror operation, allowing you to add more copies of the hardware to the case.

Step 4. If the part you are editing is not the Main hardware, then you get the same options to edit the position / Orientation or edit the mirror operation, however selecting the option to edit the position / Orientation you will be asked if you want to break the selected part link to the main hardware, meaning that if you make a change to the main hardware, this will no longer automatically be carried out to this part.

Note: Main hardware is the part that was selected at the start of the mirroring operation and all the matching parts are in sync to. You can differentiate between main and non main parts by the icon shown as

and linked parts as

Step 5. Carry out your changes and then the green tick to complete the operation or the red cross to cancel.